Rushan Beihua New Material Technology Co., Ltd. produces polyethylene wax is divided into low molecular weight polyethylene wax, oxidized polyethylene wax, etc., can be widely used in the manufacture of PVC. Polyethylene wax mainly as an external lubricant, in addition to a variety of excellent features, let us give you a detailed description.
1. Excellent ability to impart calendering, extrusion, injection and blow molding equipment
2. Does not affect the transparency of PVC mixture, the dosage range of about one thousandth to five thousandths
3. Even in the case of PVC high temperature processing, can also maintain a good viscosity.
4. PVC pipe in the case of high temperature also has a very good stability
5. Improve the dispersion of PVC filler, and improve the impact strength
6. The PVC in the extrusion molding processing energy consumption to a minimum
7. to improve the extrusion speed at the same time the appearance of no effect
8. No precipitation or migration occurs within reasonable dosage
9. Make the surface gloss of the product better
10. Reduce the resulting fouling
If you think this article is useful, please keep an eye on us.
1. Excellent ability to impart calendering, extrusion, injection and blow molding equipment
2. Does not affect the transparency of PVC mixture, the dosage range of about one thousandth to five thousandths
3. Even in the case of PVC high temperature processing, can also maintain a good viscosity.
4. PVC pipe in the case of high temperature also has a very good stability
5. Improve the dispersion of PVC filler, and improve the impact strength
6. The PVC in the extrusion molding processing energy consumption to a minimum
7. to improve the extrusion speed at the same time the appearance of no effect
8. No precipitation or migration occurs within reasonable dosage
9. Make the surface gloss of the product better
10. Reduce the resulting fouling
If you think this article is useful, please keep an eye on us.
